Communicate with Supplier? Supplier
Cindy Liu Ms. Cindy Liu
What can I do for you?
Chat Now Contact Supplier

Jining Changsong Construction Machinery Co., Ltd.

News

Home > News > How to save oil on the excavator

How to save oil on the excavator

2019-04-27

How to save oil on the excavator is one of the topics that the majority of the operators pay attention to. Under the condition of consuming less fuel and not affecting the life of the excavator, it can make more money. This is naturally what every operator wants to see. As a result, today Changsong Machinery introduces you to the fuel-saving operation skills, so that everyone can master the fuel-saving tips.
bulldozer
1. Reduce Engine speed

When the engine speed is high, the walking speed is fast, and the part with high turning speed consumes a lot of fuel. When the rotation speed is low, the fuel efficiency is better than walking at high speed. When the excavator is working, when the throttle knob or the lever is in a very low position, the fuel consumption will drop significantly, but the excavator will also work at a much lower speed. Although the excavator is mostly charged according to time, for the monthly salary, For the driver, it will be an extreme test of patience. The other is to pay attention to the regular and timely maintenance. Due to the deterioration of the oil and the incomplete filtration of the diesel oil, the fuel injection and lubrication system will be damaged, resulting in excessive consumption of fuel.
2. The body is square

If the excavator is not level when working, it is easy to increase the swing load. As we all know, when working to reduce the angle of the swing, then if the fuselage is on the slope, the process of rotation is divided into half is uphill and half is downhill. For the excavator, it is very difficult to rotate and add slope. It is really easy for the operators to stop the fuselage.

SHANTUI BULLDOZER


3. The throttle size is suitable

When the excavator is working, it is mostly a compound action, such as lifting the boom at the same time, collecting the stick, hooking the bucket, and adding the rotating motion. The speed and force of each action is controlled by the stroke of the joystick. When the engine speed is very low, in order to avoid serious engine shake and flameout, it is necessary to make some decomposition of the compound action, make a very limited energy to be properly distributed, and need to give appropriate buffer through the operating rod to match the low Low power output due to speed.

4. Clean up the soil

The walking device is covered with mud, and the resistance increases when walking, which is the cause of the increase in fuel consumption. Therefore, it is necessary to clean up the soil regularly.

COMATSU BULLDOZER


5. Adjust the tension

The tension of the track is not adjusted properly, and the resistance increases during walking, which is the cause of the increase in fuel consumption. It should be adjusted to an appropriate degree by referring to the adjustment method on the decoration manual.

At this point, on the tips of the oil-saving operation of the excavator, Oufeiya Machinery has introduced ten methods to everyone. I believe that meticulously remembering and developing habits will definitely help you to save fuel and obtain maximum benefits.

Send Inquiry

Cindy Liu

Ms. Cindy Liu

Email:

henryliu@chsmachinery.com

Send Inquiry

Tel:86-0537-3209399

Fax:86-0537-3209399

Mobile Phone:+8617753399527Contact me with Whatsapp

Email:henryliu@chsmachinery.com

Address:Electrical and mechanical way, rencheng distict, Jining city, Shandong province, Jining, Shandong

Mobile Site

http://www.jncsmachinery.com